Tile joint epoxy grouting
Tiles do not leak. The joints between them do. Ordinary cement grout absorbs water, wears out and turns black. Epoxy grout does not absorb water, so the joint stops being the weak line in the floor.
- 5.0 ★
- 195+ ratings
- Vijayawada
- our base — same-day visits in the city
- All days
- site visits, including Sundays
- AP & Telangana
- we travel for larger jobs
You probably need this if…
- Tile joints turned black, powdery or hollow
- Water seeping down even though the tiles look fine
- Joints in the bathroom staying wet long after use
- Fungus growing along the joint lines
What causes it
The same wet patch can come from different places, and each one needs a different fix. This is what we look for on site.
- 01
Cement grout absorbs water
Normal grout is porous. Every wash and every rain, it takes water in and passes it to the bed below.
- 02
Joint width too small or unfilled
Tiles laid tight against each other leave no proper joint to fill, so it cracks at the first movement.
- 03
Cleaning acids
Strong acids used to clean tiles eat the cement joint away much faster than the tile.
Our tile joint epoxy process
Step by step, in this order. Nothing is skipped to finish a day early.
- 01
Rake out the old joint
The worn cement grout is cut and raked out to a proper depth, and the joint is cleaned and dried.
- 02
Fill with epoxy grout
The joint is filled with epoxy grout, pressed in fully so there is no gap left under the surface.
- 03
Clean the tile faces
Excess grout is removed from the tile faces before it sets, and the floor is cleaned.
- 04
Curing
The floor is kept dry for the curing period, after which the joints take water, cleaning and traffic normally.
What is included
- Raking out and cleaning of old joints
- Epoxy grout filling in the colour closest to your tiles
- Cleaning of tile faces after the work
- Advice on how soon the area can be used
Free site visit. You get the measured area and a written scope before any work starts.
+91 73823 58857Frequently asked
Request a site visit
Tell us what you are seeing and where. We will come and check, measure the area and give you a clear scope — the same day wherever we can.
- We work in
- Vijayawada
- Guntur
- Amaravati
- Mangalagiri
- Tenali
- Eluru
- Gannavaram
- Machilipatnam
- Bhimavaram
- Rajahmundry
- Kakinada
- Visakhapatnam
Based in Vijayawada, so we are quickest in and around the city — and we take up work across Andhra Pradesh and Telangana.
Tell us where it leaks.
We will come and check before the next rain, measure the area and give you a clear scope in writing.